Kenwood TM-G707A User Manual
67
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
INSTALLING OPTIONS
INSTALLING THE VS-3 VOICE SYNTHESIZER UNIT
CAUTION:
ALWAYS SWITCH OFF THE POWER AND UNPLUG THE
DC POWER CABLE FIRST.
1
Remove the five screws from the upper cover of the
transceiver.
transceiver.
2
Hold the VS-3 unit with the component side facing
inward, and insert the VS-3 connector into the
corresponding transceiver connector.
inward, and insert the VS-3 connector into the
corresponding transceiver connector.
3
Replace the upper cover (5 screws).
INSTALLING A DETACHABLE FRONT PANEL KIT
(DFK-3C/ DFK-4C/ DFK-7C)
(DFK-3C/ DFK-4C/ DFK-7C)
CAUTION:
ALWAYS SWITCH OFF THE POWER AND UNPLUG THE
DC POWER CABLE FIRST.
1
While sliding the spring-loaded release switch on the
rear of the front panel, remove the front panel from
the main unit.
rear of the front panel, remove the front panel from
the main unit.
• Be careful not to drop the front panel when releasing it.
2
Hang the connector of the connectorized front panel
cable onto the catch on the main unit, and secure the
connector using the supplied screw.
cable onto the catch on the main unit, and secure the
connector using the supplied screw.
• If the screw is loose, the transceiver may not function
properly.
Release switch
Viewed with the front
panel removed
panel removed
KEN
WO
OD
FM D
UAL
BAN
DER
TM-
G70
7
KEN
WO
OD
FM D
UAL
BAN
DER
TM-
G70
7
KENWOOD
FM DUAL BANDER TM-V7
Component side