Kenwood UBZ-GR14 User Manual
9
ENGLISH
4 C
HANNEL
S
CANNING
1
When you want to scan all channels for a signal, press
the MODE key momentarily, three times.
the MODE key momentarily, three times.
•
The FRS, CH, and SCAN icons blink and the transceiver
scans the channels from channel 1 to 14.
scans the channels from channel 1 to 14.
•
All channel codes are turned off during scan.
2
When a signal is found on a channel, scan will pause at
that channel for 10 seconds.
that channel for 10 seconds.
•
To resume scanning before the 10 second timer elapses,
press the
press the
▲
or
▼
key.
3
To end scan and return to normal operation, press the
PTT switch.
PTT switch.
5 C
ODE
S
CANNING
1
When you want to scan all code settings on a single
channel, press the MODE key momentarily, four times.
channel, press the MODE key momentarily, four times.
•
The FRS, SUB, and SCAN icons blink and the transceiver
scans the codes from code 01 to 38.
scans the codes from code 01 to 38.
2
When a signal is found at a code setting, scan will pause
at that code for 10 seconds.
at that code for 10 seconds.
•
To resume scanning before the 10 second timer elapses,
press the
press the
▲
or
▼
key.
3
To end scan and return to normal operation, press the
PTT switch.
PTT switch.
UBZ-GR14 E 1-20
01.4.12, 9:35 AM
9