Kenwood TK-880 User Manual

3

Hex-headed screw

DC power cable

Mounting
bracket

5 x 16 mm self-tapping screw

Spring washer

Flat washer

Antenna
connector

Power input connector

FOR PASSENGER SAFETY, INSTALL THE TRANSCEIVER SECURELY, USING THE SUPPLIED
MOUNTING BRACKET, SO THE TRANSCEIVER WILL NOT BREAK LOOSE IN THE EVENT OF A
COLLISION.

1 Mark the position of the holes in the dash by using the mounting bracket as a

template.  Drill the holes, then attach the mounting bracket using the supplied
5 x 16 mm screws.

• Be sure to mount the transceiver in a location where the controls will be within easy

reach of the user and where there is sufficient space at the rear of the transceiver
for cable connections.

2 Connect the antenna and the supplied power cable to the transceiver.

3 Slide the transceiver into the mounting bracket and secure it using the

supplied hex-headed screws.