3com 3CR17451-91 User Manual

Figure 5   Inserting an SFP Transceiver

5 Use an appropriate cable to connect the transceiver to a suitable device.

6 Check the LEDs on the front of the Switch to ensure that it is operating 

correctly. Refer to “LEDs” on page 13 for more information.

If you wish to remove the transceiver (it is not necessary to power-down 
your Switch):

1 Disconnect the cable from the transceiver.

2 Move the wire release lever downwards until it is pointing toward you.

3 Pull the wire release lever toward you to release the catch mechanism; 

the transceiver will then easily slide out.

Product
label

Suitable port
on host Switch

DUA1745-0AAA03.book  Page 27  Friday, April 8, 2005  12:34 PM