Kenwood TM-V708 User Manual
9 MCP-2A Memory Control Program (for use with TM-V71A/E, TM-D710A/E, RC-D710)
78
TM-D710A/E
9.5.5.6 Memory Channel Shortcut
The memory channel shortcut can be used as follows:
• Double-click “Free Memory Channel: xxxx/1000” on the Status bar (see Figure 9-8).
• Double-click “Free Memory Channel: xxxx/1000” on the Status bar (see Figure 9-8).
The Memory Channel window will appear.
The memory channel shortcut can be used as follows:
Furthermore, if the following action is done, the configuration window will open to allow
configurations to be entered:
• Double-click “Offset/ Tx Freq.”, “Plus/ Minus Shift/ Split”, “T/CT/DCS” sections on the Status bar
Furthermore, if the following action is done, the configuration window will open to allow
configurations to be entered:
• Double-click “Offset/ Tx Freq.”, “Plus/ Minus Shift/ Split”, “T/CT/DCS” sections on the Status bar
(see Figure 9-8) to edit the channel configurations. The Channel Edit window will appear.
Figure 9-8 Memory Channel Shortcut
9.5.5.7 COM Port Shortcut
Double-click the “COM x” or “bps : xxxx” sections on the Status bar (see Figure 9-8). The COM
Port Setting window will appear.
Port Setting window will appear.