Kenwood TK-780 User Manual

14

■

1 Press the key programmed as Queue to enter Queue Mode.

• The last received message is displayed with the message number.

2 Use the

/

keys (right side keys only) to select the message you

want to view, if more than one message is stored in the queue memory.

3 Press the D

 or 6 key to cycle through the message, the caller’s ID, and

the channel which received the message.  Press the 

C or 4 key to toggle

between the numeric display and the message display.

4 To erase the message, press and hold the D

 key for approximately

1 second, or press the microphone # key.

■

If you pre-select a status number and then leave the transceier in Status
Mode, the transceiver will automatically respond with that status number
when a request from the base station is received.

Received short messages (up to a maximum of 48 characters) are displayed in
the same way as Status messages {page 13}.

If a GPS unit (NMEA-0183 format) is installed on the transceiver and the Send
GPS function is programmed onto a key by your dealer, you can press the
programmed key to send your location data.