Kenwood VC-H1 User Manual
13
AUTO TRANSMIT
The VC-H1 is capable of automatically
capturing and transmitting images every
3 minutes. Press [S]+[TX]+
POWER ON to switch Auto Transmit ON
or OFF (default).
capturing and transmitting images every
3 minutes. Press [S]+[TX]+
POWER ON to switch Auto Transmit ON
or OFF (default).
• Keep pressing [S] and [TX] for longer
than 2 seconds.
• “A/TX-ON” or “A/TX-OFF” appears to
indicate the new status.
• If you have entered a call sign, it will be
superimposed onto an image to be
transmitted.
transmitted.
• To interrupt transmission, press [RX].
Note:
◆
When in Auto Transmit mode, the VC-H1 does
not receive images.
not receive images.
◆
When in Auto Transmit mode, you cannot
perform key operations other than [S]+[TX]+
POWER ON and [RX].
perform key operations other than [S]+[TX]+
POWER ON and [RX].
AF MUTING
You can specify whether the VC-H1 will
mute only image signals or both audio
and image signals. Press [RX]+
POWER ON to switch AF ON (default) or
OFF.
mute only image signals or both audio
and image signals. Press [RX]+
POWER ON to switch AF ON (default) or
OFF.
• AF ON: Only image signals are muted.
• AF OFF: Both audio and image signals
• AF OFF: Both audio and image signals
are muted.
• “AF-ON” or “AF-OFF” appears to indicate
the new status.
DISPLAY CONTRAST CHANGE
You may sometimes need to adjust the
display contrast on the monitor,
depending on the ambient conditions.
display contrast on the monitor,
depending on the ambient conditions.
1 Press [TX]+[RX]+ POWER ON.
• “CONTRAST” appears.
2 Press [TX] or [RX] to change the
contrast.
3 Press [MR] to complete the
adjustment.