Kenwood TK-8160 Leaflet
ADS#44107 Printed in USA
JQA-QMA1205
■
KMC-35
Microphone
(supplied microphone)
(supplied microphone)
■
KMC-36
Keypad Microphone
■
KMC-9C
Control Station
Desktop Microphone
Desktop Microphone
■
KCT-18
Ignition Sense Cable
(requires KCT-39 option)
(requires KCT-39 option)
■
KCT-36
3m Extension Cable
(for KCT-39)
(for KCT-39)
■
KCT-39
Connection Cable
■
KAP-2
Horn Alert/Public
Address Relay Unit
Address Relay Unit
■
KES-3
External Speaker
■
KES-5
External Speaker
(requires KAP-2)
(requires KAP-2)
■
KMB-10
Key Lock Adapter
■
KLF-2
Line Noise Filter
■
KPS-10A
DC Power Supply
■
KPS-15
DC Power Supply
■
KDS-100
Mobile Data Terminal
(requires KCT-39 option)
(requires KCT-39 option)
■ KGP-2A/2B
GPS Receiver /
Modem Unit
(requires KCT-39 option)
Modem Unit
(requires KCT-39 option)
Options
All accessories and options may not be available in all markets. Contact an authorized
Kenwood dealer for details and complete list of all accessories and options.
Kenwood dealer for details and complete list of all accessories and options.
Specifications
Applicable MIL-STD
Model
TK-7160
TK-7160H
TK-8160
TK-8160H
GENERAL
Frequency Range
136~174 MHz
450~490 MHz
Number of Channels
Zone
Max.128 per Radio
Channel
Max.128 per Zone
Channel Spacing
Wide
25 kHz, 30 kHz
25 kHz
Narrow
12.5 kHz, 15 kHz
12.5 kHz
Operating Voltage
13.6 V DC±15 %
Current Drain
Standby
0.4 A
0.4 A
0.4 A
0.4 A
Receive
1.0 A
1.0 A
1.0 A
1.0 A
Transmit
8.0 A
14.0 A
8.0 A
14.0 A
Duty Cycle
Transmit: 20 %
Operating Temperature Range
-22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Frequency Stability
±0.00025 % (-22 ºF ~ +140 ºF)
Antenna Impedance
50
Ω
Channel Frequency Spread
38 MHz
40 MHz
Dimensions (W x H x D),
6-5/16” x 1-11/16” x 5-3/8”
Projections not included
(160 mm x 43 mm x 137 mm)
Weight (net)
2.6 lbs. (1.18 kg)
FCC ID
K4437663110
K4437663210
K4437673110
K4437673210
IC Certification
—
282F-37663210
—
282F-37673210
Model
TK-7160
TK-7160H
TK-8160
TK-8160H
RECEIVER
(Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide
0.28 µV
Narrow
0.35 µV
Selectivity
Wide
75 dB
Narrow
65 dB
Intermodulation Distortion
Wide
70 dB
Narrow
60 dB
Spurious Response
75 dB
Audio Output
(4
(4
Ω Impedance)
4 W with less than 5 % distortion
TRANSMITTER
(Measurements made per EIA/TIA-603)
RF Output Power
5 W / 25 W
25 W / 50 W
5 W / 25 W
25 W / 45 W
Spurious Response
70 dB
Type of Emission
Wide
16K0F3E
Narrow
11K0F3E
FM Hum & Noise
Wide
45 dB
Narrow
40 dB
Microphone Impedance
600
Ω
Audio Distortion
Wide
3 %
Narrow
5 %
Standard
MIL 810C
MIL 810D
MIL 810E
MIL 810F
Methods/Procedures
Methods/Procedures
Methods/Procedures
Methods/Procedures
Low Pressure
500.1/Procedure I
500.2/Procedure I, II
500.3/Procedure I, II
500.4/Procedure I, II
High Temperature
501.1/Procedure I, II
501.2/Procedure I, II
501.3/Procedure I, II
501.4/Procedure I, II
Low Temperature
502.1/Procedure I
502.2/Procedure I, II
502.3/Procedure I, II
502.4/Procedure I, II
Temperature Shock
503.1/Procedure I
503.2/Procedure I
503.3/Procedure I
503.4/Procedure I, II
Solar Radiation
505.1/Procedure I
505.2/Procedure I
505.3/Procedure I
505.4/Procedure I
Rain*
506.1/Procedure II
506.2/Procedure II
506.3/Procedure II
506.4/Procedure III
Humidity
507.1/Procedure I, II
507.2/Procedure II, III
507.3/Procedure II, III
507.4
Salt Fog
509.1/Procedure I
509.2/Procedure I
509.3/Procedure I
509.4
Dust
510.1/Procedure I
510.2/Procedure I
510.3/Procedure I
510.4/Procedure I, III
Vibration
514.2/Procedure VIII, X
514.3/Procedure I
514.4/Procedure I
514.5/Procedure I
Shock
516.2/Procedure I, II, III, V
516.3/Procedure I, IV, V
516.4/Procedure I, IV, V
516.5/Procedure I, IV, V
* MILSTD-810 506.X Procedure II “rain drip” specifications are conditional on installed KMC-35/36 microphones and supplied accessory connector covers.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
For this reason specifications may be changed without notice.
* FleetSync
®
is not compatible with FleetSync
®
II offered in some Kenwood products.
** The 20-pin 160-Series Easy Option Port is a not compatible with the Kenwood 26-pin Easy Option Port connector/options.
The traditional PCB connections are available for wired-in boards not having a 20-pin Easy Option Port connector.
FleetSync
®
is a registered trademark of Kenwood Corporation.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.
footnotes from front:
1
DTMF includes PTT ID, Emergency ANI, Manual Encode
(KMC-36), Auto-Dial (9 numbers) & Stun.
(KMC-36), Auto-Dial (9 numbers) & Stun.
2
Special Alert Tone Patterns operate for 2-Tone, DTMF, FleetSync
®
selective call decode.
3
Call Key 1 & 2: operates for 2-Tone, DTMF and FleetSync
®
status encode.
4
KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
KGP-2A/B, KDS-100, data modems, external GPS interface.
5
KCT-39 & KCT-18 ignition sense cable options required.
6
KAP-2 required: Horn Alert operates for FleetSync
®
, 2-Tone or
DTMF selective call decode.
7
KPG-99D program software required: Windows
®
98/ NT/2000/ Me/XP
compatible; English/Spanish program screen languages.
8
FleetSync
®
GPS features require a KCT-39 and an external GPS
receiver with NMEA TTL level serial data output; set Port 1 & 2
(Inputs) to “GPS NMEA.”
(Inputs) to “GPS NMEA.”
GPS-2A
GPS-2B