Kenwood TK-8102H Leaflet
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options
Specifications
Model
TK-7102H
TK-8102H
GENERAL
Frequency Range
Type 1
146-174 MHz
450-490 MHz
Type 2
136-162 MHz
485-512 MHz
Type 3
-
400-430 MHz
Number of Channels
8 (4 Channels x 2 Groups)
Channel Spacing
Wide
25 kHz
Narrow
12.5 kHz
Channel Step
2.5 kHz / 5 kHz
5 kHz / 6.25 kHz
6.25 kHz / 7.5 kHz
Operating Voltage
13.6V DC±15%
Current Drain
Standby
0.4 A
Receive
1.0 A
Transmit (High Power)
14.0 A
Operating Temperature Range
-30°C ~ +60°C
Frequency Stability
±2.5ppm
(-30°C ~ +60°C)
Antenna Impedance
Antenna Impedance
50
Ω
Channel Frequency Spread
Type 1
28 MHz
40 MHz
Type 2
26 MHz
27 MHz
Type 3
-
30 MHz
Dimensions (W x H x D)
6.29” x 1.69” x 5.39”
(160 mm x 43 mm x 137 mm)
weight (net)
(body only, approx.)
2.6 lbs (1.18 kg)
FCC ID
Type 1
ALH32933210
ALH32943210
Type 2
ALH32933220
ALH32943220
Type 3
-
ALH32943230
RECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide
0.28 µV
Narrow
0.35 µV
Selectivity
Wide
75 dB
Narrow
60 dB
Intermodulation Distortion
Wide
70 dB
Narrow
60 dB
Spurious Response
75 dB
Audio Output
(4W at 4
Ω
) with less than 5% distortion)
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
RF Output Power
50 W
45 W
Spurious Response
70 dB
(High Power)
Modulation
Modulation
Wide
16KØF3E
Narrow
11KØF3E
FM Hum & Noise
Wide
45 dB
Narrow
40 dB
Audio Distortion
Less than 3%
Microphone Impedance
600
Ω
■
KMC-30
Microphone
(supplied microphone
(supplied microphone
■
KMC-32
16-Key Keypad
Microphone
Microphone
■
KES-3
External Speaker
■
KLF-2
Line Noise Filter
■
KPS-15
DC Power Supply
■
KMB-10
Key Lock Adapter
Applicable MIL-STD
Standard
MIL 810C
MIL 810D
MIL 810E
MIL 810F
Methods/Procedures
Methods/Procedures
Methods/Procedures
Methods/Procedures
Low Pressure
500.1/Procedure I
500.2/Procedure I, II
500.3/Procedure I, II
500.4/Procedure I, II
High Temperature
501.1/Procedure I, II
501.2/Procedure I, II
501.3/Procedure I, II
501.4/Procedure I, II
Low Temperature
502.1/Procedure I
502.2/Procedure I, II
502.3/Procedure I, II
502.4/Procedure I, II
Temperature Shock
503.1/Procedure I
503.2/Procedure I
503.3/Procedure I
503.4/Procedure I, II
Solar Radiation
505.1/Procedure I
505.2/Procedure I
505.3/Procedure I
505.4/Procedure I
Humidity
507.1/Procedure II
507.2/Procedure II, III
507.3/Procedure II, III
507.4
Salt Fog
509.1/Procedure I
509.2/Procedure I
509.3/Procedure I
509.4
Dust
510.1/Procedure I
510.2/Procedure I
510.3/Procedure I
510.4/Procedure I, III
Vibration
514.2/Procedure VIII, X
514.3/Procedure I
514.4/Procedure I
514.5/Procedure I
Shock
516.2/Procedure I, II, III, V
516.3/Procedure I, IV, V
516.4/Procedure I, IV, V
516.5/Procedure I, IV, V
ADS#07709 Printed in USA
JQA-QMA1205
JQA-QMA1205
footnotes from front:
1
DTMF includes PTT ID, Emergency ANI, Manual Encode
(KMC-32), Auto-Dial (9 numbers) & Stun.
(KMC-32), Auto-Dial (9 numbers) & Stun.
2
Special Alert Tone Patterns operate for DTMF, selective call decode.
3
KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
KGP-2A/B, KDS-100, data modems, external GPS interface.
4
KCT-39 & KCT-18 ignition sense cable options required.
5
KCT-39 required: Horn Alert operates for DTMF selective
call decode.
call decode.
6
KPG-70D program software required: Windows
®
2000Me/XP.
Kenwood reserves the right to change specifications and features without prior notice.
Windows is a registered trademark of Microsoft Corporation in the US and other countries.
FleetSync
Windows is a registered trademark of Microsoft Corporation in the US and other countries.
FleetSync
®
is a registered trademark of Kenwood Corporation.