Midland Radio GXT325 Series User Manual

Page 11

www.midlandradio.com

SETTING PRIVACY CODES
Your GXT300/325/400/450 Series has 38 Privacy codes available.

The selected Privacy Code may be different for each channel. To

select a Privacy Code for the current channel press the MENU button

twice, and then the buttons to select one of the 38 Privacy

Codes. To confirm the selection, press the PTT button or press MENU

button again to move to the next feature setting.

Note : Selecting a Privacy Code of "oF" will disable the Privacy

feature. To communicate between two GXT300/325/400/450

Series radios, all radios in your group must be set to the same

channel and Privacy Code selections.

TRANSMIT (TX) POWER LEVEL SELECTION :

Your GXT300/325 Series has 2 transmit power levels and the

GXT400/450 Series has 3 power level settings. To select the power

level on channels 1~7 and 15~22, press the MENU button three times,

a “Pr” icon will appear blinking on the display. Then press the

buttons to select TRANSMIT POWER LEVEL icon (H: Hi/

M: Mid/L: Lo). To confirm, press the PTT button or press MENU

button again to move to the next feature setting. When the PTT

button is pressed during Low Battery Level condition, the TX

Power will automatically switch from Hi(H) to Lo(L) level.

Note : You cannot adjust the power setting on the FRS

channels (8~14). They are set to Low power per FCC

regulations.

eVOX (Hands-free Transmission)
Your GXT300/325/400/450 Series has 2 eVOX level settings:

(oF/1/2).
To set eVOX, press the MENU button four times. The display shows

“VOX” blinking while on the right of the CHANNEL NUMBER display,

an “oF” icon appears. Select “1” or “2” by pressing the buttons

and push the PTT key, or press MENU button again to move to the

next feature setting.
eVOX will be more sensitive on the “2” setting than on the “1” setting.
To turn eVOX off, press the MENU button four times. The display

shows “VOX” blinking while on the right of the CHANNEL NUMBER

display, a “1” or “2” icon appears. Select “oF” by pressing the

buttons and push the PTT key, or press MENU button again to

move to the next feature setting.

Model GXT300/325/400/450 Series