Kenwood TM-G707E User Manual

30

• You can select “0” to “9”, “A” to “Z”, “–”, “/ ”, or a space.

• To enter a dot after the digit, press [MR].  Pressing [MR]

again clears the dot.

6 Press

 

[s

s

s

s

s].

• The second digit blinks.

7 Repeat steps 5 and 6 to enter up to 7 digits.

• After selecting the 7th digit, you need not press [s

s

s

s

s].

• To re-enter the preceding digit, press [t

t

t

t

t].

• To clear all digits and move back to the first digit, press

[VFO].

8 Press [OK] to complete the setting and exit Menu

mode.

◆

You can assign names only to memory channels in which you have
stored frequencies and related data.

◆

The stored names can be overwritten by repeating steps 1 to 8.

◆

The stored names also are erased by clearing memory channels.

After storing memory names, you can switch the display
between memory names and frequencies.  You may
sometimes want to confirm frequencies stored in named
memory channels.

1 Press [MR] to enter Memory Recall mode.

2 Press [MHz] to switch between memory name and

frequency display.

You can name memory channels using up to
7 alphanumeric characters.  When you recall a named
memory channel, its name appears on the display
instead of the stored frequency.  Names can be
callsigns, repeater names, cities, names of people, etc.

  You can also name the Priority channel, but you cannot name the

Call, L1 to L6, nor U1 to U6 channels.

1 Recall the desired memory channel.

2 Press [MNU] to enter Menu mode.

3 Select Menu No. 5 (MEM.NAME).

4 Press [OK].

• The first digit blinks.

• If you recall a memory channel that has a name stored,

the last digit blinks.

5 Turn the Tuning control, or press Mic [UP]/ [DWN], to

select the first digit.