Midland Radio 895 User Manual

BATTERY INSTALLATION

Your GXT860/895 Series radio operates with either a NiMH battery
pack or optional 4 AA alkaline batteries. The belt clip should be
removed (see below) to ease installation or removal of the batteries.
To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see

diagram below) for easy access, then remove the Battery Cover
by pressing down on the top center and sliding it down from the
radio.

2. Insert 4 AA batteries observing the polarity as shown. Installing

the batteries incorrectly will prevent the unit from operating or
may damage the unit.

3. Return the Battery Cover by sliding it up on the radio. Replace the

belt clip, making sure it locks into place.

BATTERY
COMPARTMENT

BATTERY
COMPARTMENT
COVER

One Battery inserted
in this slot

Press here and
push down to open

INSTALLING THE BELT CLIP

To install the BELT CLIP, slide the clip down into the slot on the back
of the radio until the BELT CLIP LATCH clicks. To remove the BELT
CLIP, press the LOCK TAB down, then gently pull the belt clip up
toward the top of the radio.

BELT CLIP
LOCK TAB

BELT CLIP
LATCH

Model GXT860/895 Series

Page 5