Kenwood TK-2302V User Manual

5

ATTENTION:  Always switch OFF a transceiver equipped with a 

battery pack before inserting the transceiver into the charger.

1  Plug the AC adapter cable into 

the jack located on the rear of the 

charger.

2  Plug the AC adapter into an AC 

outlet.

3  Slide a battery pack or a 

transceiver equipped with a 

battery pack into the charging 

slot of the charger.

•  Make sure the metal contacts of 

the battery pack mate securely 

with the charger terminals.

•  The indicator lights red and 

charging begins.

Charging slot 

Indicator

4  When charging is completed, the indicator lights green. 

Remove the battery pack or the transceiver from the 

charging slot of the charger.

•  It takes approximately 3 hours to charge the battery pack.
•  When the charger will not be used for a long time, unplug the 

AC adapter from the AC outlet.

◆

  When the indicator blinks red, the battery pack is either defective or 

the battery pack contacts are not properly mated with those of the 

charger.

◆

  The ambient temperature should be between 4°F and 04°F (5°C 

and 40°C) while charging is in progress. Charging outside this range 

may not fully charge the battery.

◆

  The battery pack life is over when its operating time decreases even 

though it is fully and correctly charged. Replace the battery pack.