Radio Shack 20-501 User Manual

Beyond the Basics

52

 To set up the program, click on Tools, select 

Configuration, and select PRO-83 (if necessary).

 Turn on the scanner. The scanner automatically 

goes into the wired programming mode. PGM 
and WirEd appear. Then send the data from the 
PC.

Data frame numbers being received appear.

 When the scanner has successfully received all 

data, End appears. If the scanner received an 
error while receiving data, End, d-Err, and its 
frame number appear. If the scanner received a 
communication error while receiving data, C-Err 
indicates the packet number where the error 
occurred. If the scanner received a checksum 
error while receiving data, S-Err indicates the 
packet number where the error occurred. If the 
scanner received a length field error while 
receiving data, L-Err indicates the packet number 
where the error occurred.

To turn on the display/key light for easy viewing at 
night, press 

. The display lights for 15 seconds. 

To turn off the light sooner, press 

 again.