Insignia NS-PWLC591 User Manual
7
www.insigniaproducts.com
6
Plug the tip connected to the output cable into the DC
input jack on the side or back of your laptop. The
adapter powers the laptop and charges its battery.
input jack on the side or back of your laptop. The
adapter powers the laptop and charges its battery.
FAQ for Insignia Adapters
What tip should I use for my laptop?
You can determine the correct tip for your laptop by visiting the
Tip Wizard at http://bbyurl.us/tipfinder. Locate your laptop
manufacturer and model and the correct tip will be listed.
Tip Wizard at http://bbyurl.us/tipfinder. Locate your laptop
manufacturer and model and the correct tip will be listed.
If you cannot find your specific laptop model please contact
Insignia customer service at (877) 467-4289 for additional
assistance.
Insignia customer service at (877) 467-4289 for additional
assistance.
My tip is not included, how do I order a new
one?
one?
Go to the Tip Wizard at http://bbyurl.us/tipfinder for a complete
listing of compatible models. If the compatible tip for your
laptop is not included in the adapter package, one free tip can be
ordered through the Tip Wizard at http://bbyurl.us/tipfinder. Use
the Tip Wizard to locate your laptop manufacturer and model
and you can order your complimentary tip. If you are unable to
locate your laptop in the Tip Wizard please contact Insignia
customer service at (877) 467-4289.
listing of compatible models. If the compatible tip for your
laptop is not included in the adapter package, one free tip can be
ordered through the Tip Wizard at http://bbyurl.us/tipfinder. Use
the Tip Wizard to locate your laptop manufacturer and model
and you can order your complimentary tip. If you are unable to
locate your laptop in the Tip Wizard please contact Insignia
customer service at (877) 467-4289.
How do I connect the tip to the adapter cable?
After you have selected the correct tip for your laptop, connect
the tip to the output cable, making sure that the ridge on the
inside of the tip aligns properly with the groove in the output
cable connector. Additionally, the pins on the inside of the tip
should be in line with the holes in the output cable. The tip
should be pushed firmly onto the cable until the tip and cable
meet and there is no gap.
the tip to the output cable, making sure that the ridge on the
inside of the tip aligns properly with the groove in the output
cable connector. Additionally, the pins on the inside of the tip
should be in line with the holes in the output cable. The tip
should be pushed firmly onto the cable until the tip and cable
meet and there is no gap.
NS-PWLC591-NS-PWLC591-C_14-1281_MAN_V2_ENG.fm Page 7 Thursday, December 4, 2014 2:16 PM