Philips TDA6107AJF User Manual
1.
General description
The TDA6107AJF contains three video output amplifiers which are intended to drive the
three cathodes of a color CRT. The device is contained in a plastic DIL-bent-SIL 9-pin
medium power (DBS9MPF) package, and uses high-voltage DMOS technology.
three cathodes of a color CRT. The device is contained in a plastic DIL-bent-SIL 9-pin
medium power (DBS9MPF) package, and uses high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be used with black-current control.
2.
Features
■
Typical bandwidth of 5.5 MHz for an output signal of 60 V (p-p)
■
High slew rate of 900 V/
µ
s
■
No external components required
■
Very simple application
■
Single supply voltage of 200 V
■
Internal reference voltage of 2.5 V
■
Fixed gain of 81
■
Black-Current Stabilization (BCS) circuit with voltage window from 1.8 V to 6 V and
current window from +100
current window from +100
µ
A to
−
10 mA
■
Thermal protection
■
Internal protection against positive flashover discharges appearing on the CRT
3.
Ordering information
TDA6107AJF
Triple video output amplifier
Rev. 02 — 28 April 2005
Product data sheet
Table 1:
Ordering information
Type number
Package
Name
Description
Version
TDA6107AJF
DBS9MPF
plastic DIL-bent-SIL medium power package with fin; 9 leads
SOT111-1