Invacare FDX User Manual

1.

Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.

2.

Remove the joystick from the wheelchair.

3.

Remove the three hex screws that secure both halves of the mounting bracket to the arm tube.

4.

Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the mounting bracket is on the inside of the arm tube as shown 

5.

Using the three hex mounting screws and washers, secure both halves of the mounting bracket to the arm tube.

6.

Slide the joystick mounting tube through the mounting bracket to the desired position.

7.

Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket.

FIGURE 7   Repositioning Joystick



For this procedure, refer to FIGURE 7.
This procedure must be performed by a qualified technician.

Washers

Hex Mounting 

Screws

Mounting Bracket

Adjustment Lock 

Lever

Joystick 

Mounting 

Tube

Mounting 

Bracket 

(Threaded 

Plate)

Arm Tube



Joystick not shown.