Xantrex Technology 806-1054 User Manual
18
Freedom HF Owner’s Guide
Operating in Shore Power Mode
Turning the Inverter Function On and Off
The Inverter Power button on the display panel turns the Freedom
HF’s Inverter function ON and OFF. To operate, press the button
and hold for one second.
When shore power is NOT present and Inverter mode is ON:
•
HF’s Inverter function ON and OFF. To operate, press the button
and hold for one second.
When shore power is NOT present and Inverter mode is ON:
•
the AC outlets will supply power to any attached appliances
when the Inverter Power button is turned ON and
when the Inverter Power button is turned ON and
•
the AC outlets will not supply power to any attached appliances
when the Inverter Power button is turned OFF
when the Inverter Power button is turned OFF
To prevent unnecessary battery discharge, turn the Inverter Power
button off when you are not using the Freedom HF.
button off when you are not using the Freedom HF.
Inverter Mode Setting is OFF
When the Freedom HF’s Inverter function is turned off (“”) and
the AC source is outside the operating range or is disconnected, the
Freedom HF will not switch to invert mode. This means that even if
the Inverter Power button is pressed to try and turn inverter function
on, there will be no power coming from the battery to the AC output
terminals. Therefore, any appliance connected to the AC output
terminals will not operate.
the AC source is outside the operating range or is disconnected, the
Freedom HF will not switch to invert mode. This means that even if
the Inverter Power button is pressed to try and turn inverter function
on, there will be no power coming from the battery to the AC output
terminals. Therefore, any appliance connected to the AC output
terminals will not operate.
Energy Saver 25-hour Automatic Shut Off
a
During invert mode, a 25-hour countdown is initiated when the AC
load drops to less than approximately 80 watts and remains below
this level. After 25 hours the inverter automatically shuts off to
reduce battery discharge and preserve battery life.
load drops to less than approximately 80 watts and remains below
this level. After 25 hours the inverter automatically shuts off to
reduce battery discharge and preserve battery life.
ELECTRICAL SHOCK HAZARD
Turning the Inverter mode setting to OFF and/or turning the
Inverter Power button off do not disconnect DC battery power
from the Freedom HF. You must disconnect both AC and DC
power before working on any circuits connected to the Freedom
HF.
Turning the Inverter mode setting to OFF and/or turning the
Inverter Power button off do not disconnect DC battery power
from the Freedom HF. You must disconnect both AC and DC
power before working on any circuits connected to the Freedom
HF.
Failure to follow these instructions can result in death or serious
injury.
injury.
a.The feature is available only for Freedom HF 1500 (PN: 806-1544) and Freedom
HF 1800 T (PN: 806-1840-01).
HF 1800 T (PN: 806-1840-01).
Freedom HF InvChg Owners Guide.book Page 18 Tuesday, April 29, 2014 12:10 PM