Quantum 1103 Series User Manual

26

www.pridemobility.com

Quantum 1103 Ultra

V .   C O M F O R T   A D J U S T M E N T S

Seatback Angle Adjustment
If your power chair is equipped with an adjustable

seatback, you can adjust it to four (4) different angles:

90°, 102°, 105°, or 107°.

1. Remove the seatback angle adjusting screws from

each seat hinge. See figure 18.

2. Set the seatback at the desired angle.

3. Reinstall the adjusting screws to each seat hinge

and tighten.

Armrest Width Adjustment
You can change each armrest’s width independently of

the other.

1. Locate the two armrest knobs on each side of the

armrest receiver bracket. See figure 18.

2. Loosen the knobs.

3. Slide the armrests in or out to the desired width.

4. Tighten the knobs.

1. Lift the armrest straight up so that it is perpendicu-

lar to the floor. See figure 18.

2. Loosen the jam nut.

3. Turn the adjusting screw to raise or lower the front

of the armrest.

4. Tighten the jam nut to lock the adjusting screw into

place.

1. Loosen the two setscrews located on the armrest

receiver. See figure 18.

2. Raise or lower the armrest to the desired height.

3. Tighten the setscrews to secure the armrest.