Pride Mobility Mini Crosser User Manual

16

 www.pridemobility.com

Mini Crosser

The tiller console houses all of the controls needed to drive your PMV. See figure 5.

WARNING!  Do not expose the tiller console to moisture. In the event that the tiller console

does become exposed to moisture, do not attempt to operate your PMV until the tiller

console has dried thoroughly.

When the key is fully inserted and turned clockwise to power up your PMV, this meter indicates the approximate battery
voltage strength. For further information on battery charging, see V. “Batteries and Charging.”

The battery condition meter doubles as a status LED which alerts you to electrical problems that may occur with
the PMV. If your PMV develops an electrical problem, the status LED will flash a code. See VIII. “Basic Trouble-
shooting” for flash codes.

! Press the appropriate turn signal button once to activate it.

! Press the same indicator button to turn it off.

This switch activates the 4-way flashers on your PMV.

! Push the hazard lights button to turn on the flashers.

! Push the hazard lights button again to turn off the flashers.

! Release the throttle control lever and squeeze the handbrake for additional stopping power.
! To lock the handbrake into place, squeeze it fully and push the handbrake lock to the right.
! To disengage the handbrake lock, squeeze the handbrake.

LIGHTS BUTTON

HORN BUTTON

HAZARD LIGHTS BUTTON

BATTERY CONDITION METER/STATUS LED

TURN SIGNAL
BUTTONS

SPEED ADJUSTMENT DIAL

PUSH TO GO IN REVERSE

PULL TO GO FORWARD

HANDBRAKE

TURN SIGNAL
BUTTONS

HORN BUTTON

HANDBRAKE LOCK