Sharp LC-32DV22U User Manual

If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.

1 Open the battery cover.

•  Place the batteries with their terminals 

corresponding to the (+) and (–) 

indications in the battery compartment.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•  Do not mix batteries of different types. Different types of batteries have different characteristics.

•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical 

leakage in old batteries.

•  Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can 

cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

•  The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•  If you will not be using the remote control unit for an extended period of time, remove batteries from it.

2 Insert two “AA” size batteries 

(supplied with the product).

3 Close the battery cover.

The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.

If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the 

power on.

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE 

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING 

EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your operation 

manual.

Remote control 

sensor

 17”(5 m)

30°

30°