Sharp LC-32DV22U User Manual

Press 0–3 to select each view mode directly 

while the View mode menu is still on the 

screen.

• Each time VIEW MODE is pressed, VIEW 

MODE item toggles.

•  You can also select VIEW MODE item by 

pressing ϳ/ϴ.

•  You can sequentially select a view mode that 

has its own aspect ratio.

This mode is useful for 1.78:1 DVDs.

When viewing 1.85:1 DVDs, 

stretch mode will still show very 

thin black bands at the top and 

bottom of the screen.

Press VIEW MODE.

•  The View mode menu displays.

•  The menu lists the view mode options 

selectable for the type of video signal currently 

being received.

Suitable for viewing conventional 

4:3 programs in their normal 

format.

Suitable for stretching 4:3 

programs to fill the screen.

Suitable for viewing wide-screen 

2.35:1 anamorphic DVDs in full 

screen.

Stretch mode is available for HD programs.

Suitable for viewing wide-screen 1.78:1 aspect-ratio 

programs. When viewing 1.85:1 programs, the stretch 

mode will still show very thin black bands at the top 

and bottom of the screen.

For adjusting a picture's vertical position in ZOOM 

mode.

SCROLL ADJUSTMENT screen displays. 

To raise the picture, press ϳ. To lower the 

picture, press ϴ.

Press ϳ/ϴ to select “PICTURE SCROLL”, 

and then press ϵ/϶.

Press ϵ/϶ to select 

 (SETUP).

Press TV MENU and the MENU screen 

displays.

The scroll amounts are as follows:

•  480i/480p/720p/1080i signal source:

Zoom: –10 to +10

Press EXIT to return to the normal screen.

•  In SIDE BAR, S.STRETCH and STRETCH mode, 

PICTURE SCROLL will not work.

When the ASPECT is set to ON and the TV receives a 

480i signal from the INPUT 1-3 terminals, the picture 

size is automatically selected (as described in the 

following table).

Press ϳ/ϴ to select “ASPECT”, and then 

press ϵ/϶ to select “ON” or “OFF”.

Press ϵ/϶ to select 

 (SETUP).

Press TV MENU and the MENU screen 

displays.

Press EXIT to return to the normal screen.

4:3 Normal

SIDE BAR

16:9 Full

STRETCH

4:3 Letter box

ZOOM

Not defined

User-set mode

•  You can enter to the same menu screen from 

(SETUP) menu.

•

  You cannot select “SIDE BAR” and “S.STRETCH” when a 

720p or 1080i signal is being input.

•  ASPECT is not effective for HDMI input.

•  When the connected equipment does not support the 

aspect signal (ID-1), automatic switch-over will not 

operate.