Sharp LC-32DV22U User Manual

There are two types of source content in pictures 

recorded in DVD video discs: film content (pictures 

recorded from films at 24 frames per second) and 

video content (video signals recorded at 30 frames 

per second). Make this selection according to the type 

of content being viewed.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (PICTURE), then 

press ϵ/϶ or ENTER.

Press ϳ/ϴ to select “Picture Mode”, then 

press ϶ or ENTER.

Press ϳ/ϴ to select your desired picture 

mode, then press ENTER.

Select this position normally. The DVD 

player automatically detects source 

content, film or video, of playback source.

Suitable for playback of film content 

pictures.

Suitable for playback of video content 

pictures.

Press SETUP to return to the normal screen.

Night Mode enables you to control the dynamic range 

so as to achieve a suitable sound for your equipment.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (AUDIO), then press 

ϵ/϶ or ENTER.

Press ϳ/ϴ to select “Night Mode”, then 

press ϶ or ENTER.

Press ϳ/ϴ to select “On” or “Off”, then press 

ENTER.

It plays back at the recording level on 

the disc.

Loud sound such as explosion or similar 

is toned down slightly when played 

back. This makes it suitable for when it 

is connected to a stereo.

Press SETUP to return to the normal screen.

•  This function works only during playback of Dolby Digital 

recorded discs.

•  The level of Dynamic Range Reduction may differ 

depending on DVD video disc.

You can continuously playback all JPEG files 

automatically.

Press SETUP to return to the normal screen.

Plays back one file at a time.

Displays images in the form of a slide show. 

Every 5 seconds the image changes.

Displays images in the form of a slide show. 

Every 10 seconds the image changes.

Displays images in the form of a slide 

show. Every 15 seconds the image 

changes.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (PICTURE), then 

press ϵ/϶ or ENTER.

Press ϳ/ϴ to select “JPEG Interval”, then 

press ϶ or ENTER.

Press ϳ/ϴ to select your desired time, then 

press ENTER.

•  You cannot display DVD SETUP screen when disc is 

playback.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (AUDIO), then press 

ϵ/϶ or ENTER.

Press ϳ/ϴ to select “Digital Out”, then press 
϶ or ENTER.

Press ϳ/ϴ to select desired mode, then 

press ENTER.

You can select the digital output sound format 

corresponding to your system connection.

There is no sound output from DIGITAL 

AUDIO OUT jack.

Change Dolby Digital to PCM for the 

output.

Select when connected to a 2 channel 

digital stereo amplifier.

Disc audio bitstream data will be output.

•  Even if you select “Bitstream”, MPEG audio will be output 

in PCM format.