Sony PDW-1500 User Manual
Chapt
er
4
Re
c
Re
c
o
rdin
g/
Pla
y
ba
c
c
k
54
4-1 Recording
Notes
• The shortest clip that can be recorded is 2 seconds long.
Even if recording start and stop operations are performed
within 2 seconds, a 2-second clip is recorded.
within 2 seconds, a 2-second clip is recorded.
• The maximum number of clips that can be recorded is
300. If the loaded disc already contains 300 clips,
recording with the REC button is not possible. (The
message “Disc Full!” appears in the time data display.)
recording with the REC button is not possible. (The
message “Disc Full!” appears in the time data display.)
• During recording, do not turn off the POWER switch on
the rear panel or disconnect the power cord. This could
cause the clip being recorded to be lost. (See 3-5-7
“Handling of Discs When Recording Does Not End
Normally (Salvage Function)” on page 47.)
cause the clip being recorded to be lost. (See 3-5-7
“Handling of Discs When Recording Does Not End
Normally (Salvage Function)” on page 47.)
To record essence marks
A shot mark 1 essence mark or shot mark 2 essence mark
is recorded if you hold down the
is recorded if you hold down the
F/MARK1 or f/MARK2
button and press the SET button during recording.
4-1-4 Auto Clip List Recording for
Automatic Inclusion of
Recorded Clips in Clip Lists
Recorded Clips in Clip Lists
Auto clip list recording is a function for automatically
including the clips generated by recording operations in a
selected clip list. The updated clip list is saved to the disc.
Proceed as follows.
including the clips generated by recording operations in a
selected clip list. The updated clip list is saved to the disc.
Proceed as follows.
1
Insert a disc.
2
Load a clip list from the disc.
• To create a new clip list, load a NEW FILE (empty)
clip list.
• To add clips to an existing clip list, load that clip list.
3
Press the SUBCLIP button, turning it on.
The unit enters auto clip list recording mode, and the
number of the clip list which is loaded in the current
clip list appears.
number of the clip list which is loaded in the current
clip list appears.
4
Press the REC button to start recording.
A clip is generated automatically from the video and
audio recorded in the interval from start to stop of
recording, and added as a sub clip to the current clip
list. When recording stops, the updated clip list is
written to disc.
audio recorded in the interval from start to stop of
recording, and added as a sub clip to the current clip
list. When recording stops, the updated clip list is
written to disc.
5
Repeat the process of recording and stopping until you
have included all the required clips.
have included all the required clips.
To change the registered clip list, repeat step 2 to load
the desired clip list.
the desired clip list.
To exit auto clip list recording mode
Press the SUBCLIP button, turning it off.
Press the SUBCLIP button, turning it off.