Haier L1920A-C User Manual

Page of 34
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable 
  TV programming. The TV cannot display TV programming unless a TV tuner 
  device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV 
  service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
    box.
2. Tune the TV channel to the same selected
     output channel on cable box.
3. Select channels at the cable box or with 
     the cable box remote control.
Connection Option 2
1. Connect the audio and video cables from
    the Cable Box's output jacks to the TV 
    input jacks, as shown in the figure.When
    connecting the TV to a Cable Box, match
    the jack colors
   (Video = yellow, Audio Left = white, and
    Audio Right = red).
2. Select the input source by using the TV/AV
    
button on the remote control. 
3. Select your desired channel with the 
    remote control for cable box.
External AV Source Setup
How to connect
Connect the audio and video cables from 
the external equipment's output jacks to the 
TV input jacks, as shown in the figure.
When connecting the TV to external equip-
ment, match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red).
How to use
1. Select the input source by using the TV/AV
    
button on the remote control.
2. Operate the corresponding external equi-
    pment. Refer to external equipment ope-
    rating guide.