Grundig GLCD2208HDV User Manual

- 41 -

Issue

Solution

No power

Turn off the unit on the remote and at the wall

socket. Pull out the power plug. Wait 60 seconds and

then plug the power cord back in turn the power and

unit back on.

No picture

Check that your cables and antenna have been

connected firmly.

Check that your DVD Setup Audio Settings are

correct.

Conduct a restore setting to return settings back to

the factory default and clear any incorrect settings.

No sound

Check that your audio cables have been connected

firmly.

Check that the Mute setting is not on and that your

DVD Setup Audio Settings are correct.

Conduct a restore setting to return settings back to

the factory default and clear any incorrect setting.

Color distortion

Ensure that the equipment is connected properly.

Ensure that the AV video signal input is connected

properly.

Remote control

is not responding

Make sure there are no obstacles in the way of the

remote control and the sensor.

Check the batteries, as they may need to be

changed.

Move closer to the remote sensor.

Screen glittering

under PC mode

Reset the computer and enter into the safety mode,

then select the appropriate screen type by consulting

the PC operation manual.

Screen traversed

under PC mode

The phase is not appropriate. Enter into the PC

setting and change to correct level.