Memorex MVDT2002A Owner's Manual
41
Duplicating a video tape
1
Load a blank cassette tape with the erase
prevention tab intact into the recording unit.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
prevention tab intact into the recording unit.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended that you set the speed to the
SP mode on the recording unit for best results.
SP or SLP.
It is recommended that you set the speed to the
SP mode on the recording unit for best results.
3
Press INPUT SELECT to select AUDIO/VIDEO
input position. “LINE” will appear on the screen.
input position. “LINE” will appear on the screen.
4
Press REC/OTR on the recording unit, then press
PAUSE/STILL.
PAUSE/STILL.
5
Press the PLAY button on the playback VCR or
CAMCORDER, then press the PAUSE/STILL
button.
CAMCORDER, then press the PAUSE/STILL
button.
6
Release the recording pause and the playback
still simultaneously to begin the duplicating
process.
still simultaneously to begin the duplicating
process.
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Connection with second Video recorder
Connection with Video camera
Duplicating a video tape
If you connect the unit to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Make all connections before turning on the power.
To AUDIO (R) IN
To AUDIO (L) OUT
AUDIO/VIDEO
Cord (not supplied)
Cord (not supplied)
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
To VIDEO IN
To AUDIO (L) IN
Recording unit
AUDIO/VIDEO Cord (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording unit
To AV Jack
Playback Camcorder
5V40401A [En]40-41
2/3/06, 6:00 PM
41