Emerson DTE351 User Manual

21

Set the AIR/CATV Menu Option as described on page 18.

Press the Power button to turn

on the TV.

If using a VHF/UHF

antenna.

If using Cable TV.

Adjust the volume level by pressing the VOLUME

UP/DOWN button.

Press and release the CHANNEL UP/DOWN button   .

The TV automatically stops at the next channel set into

memory.

This will not operate if channels are not set into memory.

Use these buttons to select a channel. The channel

number will appear at the top right corner of the screen.

• For Channels 1 through 9, press 1-9    as desired.

• For Channels 10 through 99, press the “- --” button

   once, then the two digits in order.

• For Channels 100 through 125 (CATV only), press the “-

   --” button    twice, then the three digits in order.

AIR/CATV option must be set to CATV when using cable, see page 18.

You must subscribe to these channels through your cable company.

•  When AIR/CATV option is set to AIR, only channels

   up to 69 can be selected. When set to CATV,

   channels up to 125 can be selected.

•  If an invalid channel is selected, the display will

   revert to the original channel.