Panasonic CQ-VD7200U User Manual
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
the setting menu.
3
Setting
q Press [ENTER] to import the image.
Direct Image Capture
(Only for remote control)
If you would like to capture a picture, press and hold [OSD] (CAPTURE) for
more than 2 seconds.
Subsequent steps are the same as the steps w described above.
more than 2 seconds.
Subsequent steps are the same as the steps w described above.
w Press [[] or []] to select a save area.
¡You can store five images at maximum.
¡The existing image is replaced with a new image when saving an image in
¡You can store five images at maximum.
¡The existing image is replaced with a new image when saving an image in
an area. Check the right-hand smaller image on the screen before saving a
new one. If you would like to keep the existing image, do not overwrite.
new one. If you would like to keep the existing image, do not overwrite.
e Press [ENTER] to save the image.
[OSD]
(CAPTURE)
(CAPTURE)
[}] [{]
[] ] [[ ]
(Select)
[ENTER]
[] ] [[ ]
(Select)
[ENTER]
[MODE]
(End)
(End)
[MENU]
r Image saving completed.
Notes:
¡Do not turn off the unit while saving an image.
¡To capture an image from TV, the broadcasting conditions should be
¡Do not turn off the unit while saving an image.
¡To capture an image from TV, the broadcasting conditions should be
excellent.