Panasonic CQ-VD7200U User Manual

Page of 47
CQ-VD7200U
89
80
E
N
G
L
I
S
H
CQ-VD7200U
No sound from the
subwoofer.
Trouble
Cause/Step
The brightness of the
screen is not stable.
This is a characteristic of liquid crystal panels and is not a problem.
The screen is not adjusted properly.
a
Make every adjustment of the screen.
“AUTO” dimmer is selected.
a
Select one of the dimmer levels from among 1 to 4 to make the dimmer
adjustment become free from light intensity.
The picture is dark.
The picture is whitish.
Something is wrong
with the picture. The
picture is light in color.
Red, blue, or green
spots appears.
Display Settings
Trouble
Cause/Step
Private mode is set to “ON”.
a
Set private mode to “OFF”.
Subwoofer volume level is set to zero.   
a
Rise the volume of Subwoofer.
The speaker leads are connected in reverse between right and left.
a
Connect the speaker wires to the correct one.
Cables are not correctly connected.
a
Connect the cables correctly.
No sound from left,
right, front, or rear
speaker.
Sound Settings
Left and right sounds
are reversed.
88
79
E
N
G
L
I
S
H
Troubleshooting
(continued)
File playing time is not
displayed correctly.
You played a file in which character information had been recorded by use of
ID3Tag 2.0 or later version.
a
A file in which character information was recorded by use of ID3Tag 2.0
or later version may not be reproduced normally. For example, the file
playing time may not be displayed correctly.
You turned off the ignition switch of the car during playback.
a
Playing another file will return the file playing time to normal.
Trouble
Cause/Step
MP3 (Continued)
Trouble
Cause/Step
The picture from a car
navigation system is
not displayed.
The picture from a VCR or a
camcorder is not displayed.
The picture from a rear
view camera is not dis-
played.
The picture or the sound
of the rear monitor is not
switchable.
“AUTO” is not selected for the setting of a rear monitor.
a
Select “AUTO” for the setting.
Input setting of a camera is not correct.
a
Make the input setting correct.
Rear view camera is not connected correctly.
a
Connect a rear view camera correctly.
A VCR or Camcorder is not connected correctly.
a
Connect a VCR or Camcorder correctly.
Input setting of a car navigation system is not correct.
a
Make the input setting correct.
The connection of a car navigation system is not correct.
a
Connect it correctly.
Car Navigation, VCR, Camcorder, Rear View Camera, Rear Monitor
Cause/Step
Trouble
The radio antenna is not extended enough.
a
Fully extend the radio antenna.
The motor antenna relay control lead is not connected correctly.
a
If there is a motor antenna in the car, connect the motor antenna relay 
control lead to the motor antenna lead that is installed in the car correctly.
Station is too far, or signals are too weak.
a
Select other stations of higher signal level.
Poor reception of FM
stereo and monaural
broadcasts.
Radio