Panasonic PV 9D53 User Manual

6

Press OPEN/CLOSE or
PLAY.
The disc tray closes auto-
matically.
The TV-screen, 

  changes

to “

” and then playback

commences.

• A menu screen will
  appear on the TV screen,
  if the disc has a menu
  feature.

1

Press DVD on the remote
control  to select DVD
mode.
Press  OPEN/CLOSE  on
the unit or the remote con-
trol.
The disc tray will open.

2

Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.

3

Press 

/

 or 

/

to make a selection.

4

Press ENTER.
• Title is selected and play commences.

5

Press STOP to end playback.
• The unit memorizes the stopped point, depending on the

disc. “

” appears on the screen. Press PLAY to resume

playback (from the scene point).

• If you press STOP again or unload the disc (“   ” appears

on the screen.), the unit will clear the stopped point.

7

Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press OPEN/CLOSE then press
POWER.
The disc tray closes and unit turns off.

NOTES:
• If a non-compatible disc is loaded, “In-

correct Disc”,  “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 9 and 38).

• Some discs may take a minute or so to

start playback.

• When you set a single-faced disc label

downwards (ie. the wrong way up) and
press  PLAY or OPEN/CLOSE  on the

unit, “

” will appear on the display for

about 3 seconds and then “No Disc” or
“Incorrect Disc” will be displayed.

• Some playback operations of DVDs

may be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the soft-
ware producers designed, some play-
back features may not be available. Also
refer to the instructions supplied with the
DVDs.

 5E90501A P24-32

21/4/03, 11:57 PM

27