Pioneer PDP-4270 User Guide

En

• About the MONITOR OUT terminals

The MONITOR OUT terminals cannot output the following 
signals:
1 Video signals input from the COMPONENT VIDEO 

terminal

2 Video signals from a personal computer
3 Digital video and audio signals from the HDMI terminals

• When watching images played back on a VCR connected to 

the MONITOR OUT terminals, select an input source (e.g., TV 
channel reception) on the recording equipment other than 
external input sources. Selecting an external input source 
may result in distorted images or noise.

• Make sure to place the VCR into the standby status when 

presetting TV programs for recording with the TV Guide On 
Screen™ system.

• The MONITOR OUT terminal may result in audio delay 

between the speaker and AUDIO. This may be reduced by 
muting the speakers on the Plasma Display. Nonetheless, 
you may experience delay between audio and video.

• If degraded picture quality is observed while viewing copy-

protected VOD movies connect the Plasma Display directly 
to other TV sets. Do not connect through a VCR.

The digital audio output terminal (optical) on this system can 
output Dolby Digital signals. Using an optical digital cable, 
connect an AV receiver to the digital audio output terminal 
(optical) on the rear of the Plasma Display. This allows audio 
such as digital TV broadcasting to be played in high quality.

If your AV receiver does not have a digital audio input terminal 
(optical), you may connect the MONITOR OUT terminals 
(AUDIO) on the rear of the Plasma Display to the audio input 
terminals on the AV receiver. However, this method may result 
in audio delay between the speakers and AUDIO, which may be 
reduced by muting the speakers on the Plasma Display. 
Nonetheless, you may experience delay between audio and 
video.

• When using the digital audio output terminal (optical), you 

need to make settings depending on your AV receiver. For 
more information, see the instruction manual that came 
with the AV receiver. 

• For details, refer to the operation manual for the audio 

equipment to be connected.

• The audio accompanying the images shown on the display 

are always output to the SUBWOOFER OUTPUT terminal.

• When signals are input from the HDMI terminals, no digital 

or analog signals are output from the DIGITAL OUT terminal.

AV cable 
(commercially available)

G-LINK cable (supplied)

Viewed from below of 
the Plasma Display

This connection is 
not required when 
connecting an AV 
amp equipped 
with the surround 
function to a 
subwoofer.

Optical digital cable 
(commercially available)

AV cable
(commercially available)

Viewed from below of 
the Plasma Display

PDP6070HD.book  Page 74  Friday, May 19, 2006  5:01 PM