Leica DM4000B User Manual
14
4. Unpacking the Microscope
The device is delivered in two boxes.
The stand box contains the following compo-
nents:
nents:
• Stand with integrated incident light axis and
objective nosepiece
• Specimen stage with stage bracket
• Power cable and PC connecting cable
• CD with Leica software package
• Instructions and list of microscope default
settings (“Identification Sheet”)
The system box contains the microscope acces-
sories:
sories:
• Tube
• Eyepieces
• Objectives
• Condenser
• Lamp housings with accessories
• Fitting tool
• Depending on configuration, additional micro-
scope accessories such as filter cubes, etc.
The external ebq 100 supply unit* is delivered in
separate packaging.
separate packaging.
For the Leica DM5000 B microscope:
The CTR5000 electronics box is also delivered in
separate packaging.
The CTR5000 electronics box is also delivered in
separate packaging.
First, carefully remove all components from the
transportation and packaging materials.
transportation and packaging materials.
Note:
Avoid touching the lens surfaces of the
objectives. If fingerprints do appear on the glass
surfaces, remove them with a soft leather or
linen cloth. Even small traces of finger
perspiration can damage the surfaces of optical
surfaces in a short time. See the chapter, "Care
of the microscope"
objectives. If fingerprints do appear on the glass
surfaces, remove them with a soft leather or
linen cloth. Even small traces of finger
perspiration can damage the surfaces of optical
surfaces in a short time. See the chapter, "Care
of the microscope"
→
p. 64, for additional in-
structions.
Caution!
Do not yet connect the microscope and pe-
ripherals to the power supply at this point!
ripherals to the power supply at this point!
4. Unpacking the Microscope