Leica DM4000B User Manual

28

• Remove the plug cap on the left side of the

stand.

• Insert the polarizer into the receptacle until it

latches in place (Fig. 30).

• Insert the analyzer cube as described in sec-

tion 5.7 "Equipping the Incident Light filter
turret" 

→ 

p. 26, in the corresponding position

on the filter turret. See the list provided
(“identification Sheet”) for the correct
position.

Inserting the analyzer

1 The plug cap is replaced with the analyzer.

• Insert the objective prism into the tube slot

(Fig. 31.1). The code letter must match the
code letter on the objective.

• With the microscope Leica DM5000 B the DIC

objective prisms are already mounted in the
DIC turret above the objective revolving
nosepiece(Fig. 68).

Inserting the objective prism slide

1 Objective prism slide

1

1