Smeg SHW935X User Manual

 

 

 

 

 

 

•  Remove the Grease filters from the Hood Canopy 1. 
 
•  Unfasten the 4 screws on the corners of the Suction 

Panel. 

 
• Remove any Activated charcoal filters from the 

Motor unit 3. 

 
 
•  From inside the Hood canopy, screw the Motor unit 3 

to the Hood canopy 1 using 6 Screws 12f provided. 

 
  Warning: Cable raceway 19 must be screwed into 

place using one of the Screws 12f to fix it in the 
position shown in the figure, locking the Hood wiring 
in place. 

 
•  Make the electrical connections between the Motor 

Unit  3 and the Hood Canopy 1,  connecting the 
Controls connector and the Lighting connector. 

  Warning: Make sure that the Connectors are 

properly inserted into the housing. 

 Warning: There will be a specific Connector 

according to the type of controls. 

 
 
• For the Recirculation Version, fit the Activated 

Charcoal Odour Filter, if there is one. 

 
• Replace the Suction Panel, using the 4 screws 

removed as above.  

 
•  Replace the metal grease filters. 
 

 

10 P

OLI