Insignia NS-DXA2 Leaflet
Connecting your converter box
1 Connect your existing antenna cable to the RF IN jack on the converter box. You
may need to remove the antenna cable from the back of your TV and connect it to
the converter box.
the converter box.
Note: An antenna connection is mandatory.
2 Connect the converter box to your TV:
Option 1 (Best):
A. Connect one end of a yellow video cable (not included) to the VIDEO OUT jack
2 Connect the converter box to your TV:
Option 1 (Best):
A. Connect one end of a yellow video cable (not included) to the VIDEO OUT jack
on the converter box. Connect the other end to the VIDEO IN jack on the TV.
B. Connect one end of the red and white audio cable (not included) to the AUDIO
B. Connect one end of the red and white audio cable (not included) to the AUDIO
OUT L/R jack on the converter box. Connect the other end to the AUDIO IN
L/R jack on the TV.
Option 2 (Good): Connect one end of a coaxial cable (included) to the RF OUT
jack on the converter box. Connect the other end to the RF IN jack on the TV.
3 Connect the AC adapter to the DC IN jack and to an AC outlet.
4 Follow Setting up your converter box on the other side of this guide to complete
4 Follow Setting up your converter box on the other side of this guide to complete
setting up your converter box.
Quick Setup Guide
NS-DXA2 | Converter Box
Congratulations on your purchase of a high-quality Insignia
product. Your NS-DXA2 represents the state of the art in
converter box technology and is designed for reliable and
trouble-free performance.
product. Your NS-DXA2 represents the state of the art in
converter box technology and is designed for reliable and
trouble-free performance.
Package contents
• Converter box
• Remote control and batteries (2)
• AC adapter
• Coaxial cable
• Quick Setup Guide
Before using your new product, please read these
instructions to prevent any damage.
Installing the remote control batteries
1 Press the battery compartment cover latch, then remove the
cover.
2 Insert two AAA Alkaline batteries (included) into the battery
compartment. Make sure that the + and – symbols on the
batteries match the + and – symbols in the battery compartment.
batteries match the + and – symbols in the battery compartment.
3 Replace the cover.
Remote control
Front view
Back view
Power LED
Power button
Channel - / +
RF IN
RF OUT
VIDEO
OUT
AUDIO L/R
OUT
DC IN
OR
TV
Antenna
Coaxial cable
(included)
Video cable
(not included)
Audio cable
(not included)
(not included)
Currently
not in use
PASS-THROUGH
OK
CC
MUTE
VOLUME +/-
Numbers
(power)
INFO
INFO
MENU
CHANNEL
Press to by-pass the converter box so your TV functions as it did without the
converter box (receive analog channels only).
converter box (receive analog channels only).
Press to select a highlighted menu item.
Press to turn on Closed Captioning.
Press to turn off the sound.
Press to increase or decrease volume.
Press to enter channel number or parental control password.
Press to turn the converter box ON and OFF.
Press to navigate through the on-screen menus.
Press to display information about the current channel.
Press to open or close the on-screen menu.
Press to change channels.
Press to enter a sub channel number. For example, to enter sub channel 1 for
the main channel 2, press 2, press this button, then press 1.
the main channel 2, press 2, press this button, then press 1.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your User Guide is not provided
in the box but is available online. Go to
www.insigniaproducts.com, then click Support & Service.
Enter your model number in the box under Manual,
Firmware, Drivers & Product Information, then click
.
OPEN SOURCE SOFTWARE NOTICE
This product includes zlib: Copyright © 1995-2005
Jean-loup Gailly and Mark Adler. Additional terms can be found
in your User Guide at www.insigniaproducts.com.
AC adapter
IR Remote Sensor
NOTE: Do not cover the
window with objects.