Panasonic SC-PM19 User Manual

Page of 28
Recording operations
21
RQT7364
Before recording
• Only normal position tapes are recommended.
• Remove tabs to prevent recording. To record, cover tabs as shown.
• Volume and sound quality during playback have no effect on
recording.
To erase a recorded sound
1 Press [TAPE 3] and then [STOP 7, –DEMO].
2 Insert the recorded cassette with the tape facing out.
3 Press [¶/8 REC].
Preparatory steps
Wind up the leader tape to begin recording immediately.
Preparation: Press [TAPE 
3] and then [STOP 7, –DEMO] to
select tape as the source.
Press [OPEN 
0], insert a cassette with the tape
facing out.
Close the lid by hand.
A
Recording the radio
Preparation: Do the preparatory steps as above.
1
Tune to the required station.
(
\ page 9)
2
Press [
/8 REC] to start recording.
Side A
Tab for side B
Tab for side A
To re-record
Adhesive tape
Normal tape
OPEN 
0
B
Insert inside the
guides
Forward side
B
A
2
DEMO
STOP
,
2
/
8
REC
To
stop recording
stop recording
temporarily
cut an unnecessary
part while recording
record on the other
side of the tape
Action
Press [STOP 
7
, –DEMO].
Press [
¶/8
 REC].
Press [
¶/8
 REC] again to resume
recording.
Press [
¶/8
 REC] during the
unnecessary part.
Press [
¶/8
 REC] again to resume
recording.
Turn the tape over and press [
¶/8
REC].
RQT7364-P_21-22_EN
30/12/03, 10:35 am
21