Dakota Alert Wireless Transmitter User Manual

PIR settings (figure 1)

The jumpers settings are as follows:
Range: High-80 feet

Medium- 50 feet

Low- 30 feet

LED:

ON- led will flash when it detects

OFF- led is always dark

Filter:

On- set for outdoor use

Off-set for indoor use

Reset: 15 seconds to reset after activation

120 seconds to reset after activation

Coding the transmitter:

Note: The transmitters and receivers are preset

at the factory. DO NOT change settings, unless

changing the tune or experiencing false sig-

nals.

1. When looking at the PIR you will see clips on the

sides of the plastic case. Push one of the clips away

from the center of the case and lift out the PIR and

the plastic backing. You will now be looking inside of

the case at the radio transmitter (figure 2)

Figure 1

PIR with cover removed