Panasonic 8020P User Manual
23
Before Starting
Contents
Icon
Contents
Icon
No.
No.
17
18
19
20
21
22
23
24
25
28
26
27
18
19
20
21
22
23
24
25
26
27
PAPER TRAY Key
Selects the paper tray.
Selects the paper tray.
Warning Indications
When unit is used as a
photocopier.
When unit is used as a
photocopier.
: Add Paper (See page 14)
: Replace Toner Bottle
(See page 16)
: Remove misfed paper
(See pages 16-21)
: Call Service
: Replace Toner Bottle
(See page 16)
: Remove misfed paper
(See pages 16-21)
: Call Service
Cursor Key
To select the zoom
ratio, etc.
To select the zoom
ratio, etc.
(For DP-8016P)
Keypad
Sets copy quantities, etc.
Sets copy quantities, etc.
RESET Key
Resets all features to the initial
power-on state of the active function.
Resets all features to the initial
power-on state of the active function.
START Key
Starts the jobs.
(Copy, Scan, etc.)
Starts the jobs.
(Copy, Scan, etc.)
SET Key
Sets the parameter(s) of Function
settings.
Sets the parameter(s) of Function
settings.
CLEAR Key
Clears the copy quantities, etc.
Clears the copy quantities, etc.
FUNCTION Key
Used for changing the paper size,
initial function values (default
values) and key operator settings.
Used for changing the paper size,
initial function values (default
values) and key operator settings.
ALARM LED (RED)
Lights/Flashes when trouble
occurs.
Lights/Flashes when trouble
occurs.
ACTIVE LED (GREEN)
Flashes when machine is in
operation.
Flashes when machine is in
operation.
Lights:
When the machine stops due to the following
condition(s):
● No paper in the selected tray or toner has run
When the machine stops due to the following
condition(s):
● No paper in the selected tray or toner has run
out.
● Paper has misfed, etc.
Flashes:
When the machine alerts of the following
condition(s):
● No paper in the Tray. (Tray not selected)
Flashes:
When the machine alerts of the following
condition(s):
● No paper in the Tray. (Tray not selected)
● Toner is getting low, etc.
STOP Key
Stops the jobs.
(Copy, Scan, etc.)
Stops the jobs.
(Copy, Scan, etc.)
29
Sets scanning resolution.
(See page 70)
(See page 70)
∗
NOTE:
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep pressing the
ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep pressing the
ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE
: Brighter