Nortel Networks PO937240 02 User Manual

Page of 152
Chapter 2 Answer calls
37
Telephone Features Programming Guide
Answer buttons help attendants to monitor incoming calls for one or several other people. For 
example, an attendant can have line appearances for three different managers on the answer 
buttons of the telephone.
When an attendant answers a call for manager A the appearance stops at that manager’s set. This 
flexibility allows for another (simultaneous) call to come in on the same line. The same is true for 
manager B and manager C. When incoming call traffic increases, the calls can route to a Hunt 
Group to optimize call handling. For more information about Hunt Groups se
.
The Answer button setting in Feature settings programming allows you to determine what types of 
calls ring at the telephone. Your options are: 
basic
enhanced
extended
For more information about programming Answer buttons, see the Business Communications 
Manager Programming Operations Guide
.
T7100 telephones have no Answer buttons assigned to monitor other sets, but you can monitor 
them.
You cannot make calls using Answer buttons.
If two or more calls are ringing at a person’s telephone, the first call appears on the attendant’s 
Answer button. Any additional calls appear on intercom buttons, if they are available.
Listen to a call as a group
To allow people in your office to listen in on a call using Group Listening, press 
≤°‚¤.
You hear the caller’s voice through your telephone’s speaker. Continue to speak to the caller 
through the telephone handset. Your telephone’s microphone is off, so the caller does not hear 
people in your office. 
Note: 
More than one attendant can have an Answer button for a single 
telephone, allowing two or more attendants to handle calls for a busy 
person.
Each telephone can handle calls for up to eight other people using a 
separate Answer button for each person.