Nortel Networks PO937240 02 User Manual

Chapter 3 Make a call

Telephone Features Programming Guide

You can speak with one caller while the other call is on hold. You can switch between calls using 
≥.

On a T7208, T7310, T7316 or M7324(N) telephone:

Press the line button of the caller with whom you want to speak. The other call is automatically 
put on hold. 

Press 

≤‹to re-establish the conference.

On a T7100 telephone:

Press 

≤£‹. The first call is put on hold. 

Press 

≥ to switch between calls.

Press 

≤‹ to re-establish the conference.

You can remove yourself from a conference, and connect the other two callers. 

Enter the Transfer feature code 

≤‡‚.

When you remove yourself from a conference using the Transfer feature, and both calls are from 
outside your system, one of the calls must have come to you on a disconnect supervised line, or the 
call disconnects. 

You are trying to add a fourth party to your conference call, or to 
join two conferences together. Release one call from the 
conference before adding another, or keep the two conferences 
separate.

You have tried to make a conference call, but your system is 
handling its maximum number of conference calls.

You are on a conference with the two lines or telephones shown. 
You can drop out of the conference and leave the other two 
parties connected (Unsupervised Conference) by pressing 

TRANSFR

 or entering the Transfer feature code.

You have activated the Conference feature with one call active 
and another on hold. Press the held line to bring that person into 
the conference.

For other displays, see 

.

3 parties only

Conference busy

Line001  221
TRANSFR

Press held line