Sony MDR-RF5000K User Manual
Operation
21
US
Using Additional Headphones
In this system, by using additional MDR-RF5000 wireless headphones (sold
separately), more than one person can enjoy the surround sound experience
wirelessly at the same time.
Charge additional headphones with the transmitter of this system.
* There is no limit to the number of headphones that can be used within the RF signal
separately), more than one person can enjoy the surround sound experience
wirelessly at the same time.
Charge additional headphones with the transmitter of this system.
* There is no limit to the number of headphones that can be used within the RF signal
transmission area.
Notes
• The transmitter turns off automatically while charging. Remove these headphones from the
• The transmitter turns off automatically while charging. Remove these headphones from the
transmitter when using other headphones.
• This unit is not compatible with other wireless headphones since this unit employs a
proprietary 2.4 GHz wireless digital transmission system.
When using additional headphones
Each transmitter has its own ID number. When using additional MDR-RF5000
wireless headphones (sold separately), be sure to set the transmitter’s ID to that of the
headphones, otherwise the headphones will not work.
wireless headphones (sold separately), be sure to set the transmitter’s ID to that of the
headphones, otherwise the headphones will not work.
1
Remove the headphones from the transmitter.
The transmitter turns on automatically.
The transmitter turns on automatically.
2
Put on the headphones.
The headphones automatically turn on.
The headphones automatically turn on.
Note
Charge the battery of additional headphones before setting their IDs, or use commercially
available (size AA) alkaline batteries.
Charge the battery of additional headphones before setting their IDs, or use commercially
available (size AA) alkaline batteries.
3
Press and hold TUNE/ID SET on the transmitter and that on the headphones
at the same time for more than 3 seconds.
A repeated beep sound is heard from the
headphones and ID setting starts. When
the sound changes to a continuous beep
sound, the ID number is set for the
headphones.
headphones and ID setting starts. When
the sound changes to a continuous beep
sound, the ID number is set for the
headphones.
Transmitter
MDR-RF5000
(sold separately)
(sold separately)