Sony MDR-RF5000K User Manual
Preparation
7
US
Rear Panel of the Transmitter
ATT
TUNE/ID SET
L
LINE IN
DIGITAL IN
DIGITAL OUT
(THROUGH)
R
0dB
-8dB
DC IN 9V
1
2
3
4
5 6
1
TUNE/ID SET button
(See pages 19 and 21 for details.)
Use this button when reception
deteriorates, or when using additional
headphones.
Use this button when reception
deteriorates, or when using additional
headphones.
2
ATT (attenuator) switch
Set this switch to “0 dB” if the volume is
too low for analog input. Normally, this
switch should be set to “–8 dB.”
too low for analog input. Normally, this
switch should be set to “–8 dB.”
3
LINE IN jacks
(See page 14 for details.)
(See page 14 for details.)
Connect the audio output jacks on an
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
4
DIGITAL IN jack
(See page 15 for details.)
(See page 15 for details.)
Connect a DVD device, digital satellite/
TV receiver, or other digital component
(sold separately) to this jack.
TV receiver, or other digital component
(sold separately) to this jack.
5
DIGITAL OUT jack
(See page 15 for details.)
(See page 15 for details.)
Connected components' digital signal
integrity retained when installed.
integrity retained when installed.
6
DC IN 9V jack
Connect the supplied AC power adaptor
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)