Atlona AT-HD30SR Leaflet

The AT-HD30SR is designed to replace long runs of HDMI 

cable with CAT5E/6 cable( also called Ethernet, or LAN ca-

ble). (Atlona recommends using CAT6 cable for all extender 

products) This product is capable of extending 1080p signal 

from any HDMI or DVI source up to 30 Meters (99 ft.) with no 

signal degradation. LED indicator lights on the AT-HD30SR 

activate when the unit is connected properly.

· Simple connection. No additional HDMI cables required. 

· Transfers HDMI Signal ( Digital Video and Audio ) over   

 

  CAT5E/6 cable up to 30 meters (99ft) at Full 1080P v1.3.

· Auto feedback, equalization and amplification adjustment     

  regardless of cable length.

· Compact size. 

· Signaling rates up to 2.25Gbits

· Supports HDMI or DVI inputs. 

· HDCP and IEEE-568B compliant.

1) Sender unit AT-HD30S 

2) Receiver unit AT-HD30R  

3) Manual 

4) 8.5” pig tail

·   To reduce the risk of electric shock, do not expose this 

product to rain, water or moisture.

·   FCC Regulations state that any unauthorized  

 

modifications to this equipment could void the user’s  

 

authority to operate this  equipment.

·   Use only accessories recommended by ATLONA to  

 

avoid fire, shock or other hazards.

·   Unplug the product before cleaning. Use a damp cloth for 

 

cleaning. Do not use cleaning fluid or aerosols

·   Never open or remove unit panels or make any  

 

adjustments not described in this manual. Attempting to   

 

do so could expose you to dangerous electrical shock or 

 

other hazards. It may also cause damage to your 

 

AT-HD30SR. Opening the product will void the warranty.

·   Do not attempt to service the unit. Instead disconnect it  

 

and contact your Authorized ATLONA reseller or contact  

 

ATLONA directly

Atlona

2151 O’toole Ave Unit D

San Jose, CA 95131

Tel: 408-954-8782

Fax: 408-954-8792

toll free: 1-877-536-3976

Powerless HDMI Extender

over CAT5e/6 Cable

SKU: AT-HD30SR

1