User Manual (AHA2930U-ROHS-KIT)Table of ContentsContents10Getting Started13Kit Contents13Installation Process13Installing the SCSI Card 2930U14Installing the SCSI Card 2930CU14Registering Your SCSI Card16Installing SCSI Devices17Installing Internal SCSI Devices17Connecting External SCSI Devices21Installing Drivers23Windows 2000 and Windows XP23Verifying Driver Installation – Windows XP23Verifying Driver Installation – Windows 200024Windows Me25Windows 95 and Windows 9825Installing the Driver When Installing Windows 95/9826Installing the Driver When Windows 95 is Already Installed26Installing the Driver When Windows 98 is Already Installed29Verifying Driver Installation – Windows 95/98/Me33Windows NT 4.033Installing the Driver When Installing Windows NT34Installing the Driver When Windows NT is Already Installed34Installing the Driver When Installing Windows NT to a SCSI Hard Disk Drive Attached to the SCSI C...34Completing an Installation from CD34Completing an Installation from Floppy Disk35Removing the SCSI Card 2930CU36Troubleshooting37First Steps37Troubleshooting Q & A – General39How can I tell if the SCSI Card 2930CU software driver is loading properly?39Why does an X inside a red circle appear by the SCSI Card 2930CU software driver in Device Manager?39How can I check the status of a resource (for example, IRQ, Memory, I/O)?39Common Error Messages40“Device connected, but not ready”40“Start unit request failed”40“Time-out failure during...”40“BIOS Not Installed”40Troubleshooting Q & A – Windows 95/98 Only41When I start Windows 95/98, the system locks up when the Windows logo displays. How can I get the...41Why is there a yellow “!” beside my driver(s) in Device Manager?41How do I check for faulty cables, termination, or damaged device?41Where do I check to see if the Master Boot Record was modified?41Where do I check for conflicting or unavailable resources?42What if there is no SCSI Controller icon under Device Manager, or the software driver for the SCS...43How do I use the Windows Hardware Conflict Troubleshooter?44What is a miniport driver, and how do I make sure that the miniport driver for my SCSI card is in...44What if a yellow exclamation mark or a red X appears in Device Manager in front of my SCSI card.44What do I need to do if I change or upgrade my SCSI card?45Troubleshooting Q & A – Windows NT 4.045How can I check which resources are available on my computer?45I made changes to the SCSI card configuration and Windows NT no longer boots.46Error Codes46Understanding SCSI50SCSI IDs51SCAM Protocol51Terminating the SCSI Bus52Preparing SCSI Devices for Installation53Using SCSI Devices53Hard Disk Drives53Installing Multiple SCSI Cards54Configuring the SCSI Card 2930CU with SCSISelect55SCSISelect Settings56Starting SCSISelect57Using SCSISelect Settings57SCSI Bus Interface Options57Boot Device Options58SCSI Device Configuration Options58Advanced Configuration Options59Using SCSI Disk Utilities61Exiting SCSISelect62Using Advanced Configurable Parameters in Windows NT 4.063Using Windows NT SCSI Parameters63Value Keys for SCSI Parameters64Using Driver-specific Parameters66Value Keys for Driver-specific Parameters66Obtaining SCSI Cables68External Cables68Internal Cable69Maximum Cable Lengths69Size: 1.58 MBPages: 70Language: EnglishOpen manual
