User ManualTable of ContentsDocument Overview3Revision History5Document Cautions and Notes5Abbreviations Used in this Guide5Overview of RF Modules for Prism Remote Units6RF Module Digital/Analog Radio Transceivers7RF Module Types9Single- and Dual-Bay RF Modules with Classic or SuperDARTs9HDM RF Modules10Legacy Dual-Bay 40W RF Modules11RF Module Components12Linear Power Amplifiers13Duplexer and Low Noise Amplifier14Digital Processing Module14Cables14RF Group Assignments for PRU RF Module Bays15Understanding RF Cable Rules18RF Module Cables and Supported Bay Use for Single-Card, Dual-Card, and HDM RF Modules18RF Module Cables and Supported Bay Installations for Legacy Dual-Bay 40W RF Modules20Install the RF Module(s)21Safety Precautions21Guard against Damage from Electro-Static Discharge22Unpack and Inspect the RF Module22Remove Release Liners from the RF Module23Check the DC Power Switch for the Module Bay24Dual-Bay Modules Only—Remove the Module Bay Shelf25Install the RF Module into the Prism Remote Chassis26Secure RF Module Latches34Connect Latches on Single-Bay and HDM RF Modules34Connect Latches on Dual-Bay RF Modules35Latches on Legacy Dual-Bay 40W RF Modules36Verify that the RF Module Mounting Hook is Engaged36Connect the RF Module Cables to the PRU Chassis36Connecting Cables in a Single-Bay RF Module Installation37Connecting Cables in a Dual-Bay RF Module Installation40Power on the RF Module(s) and the Prism Remote Unit44Close the Remote Unit Door and Solar Shield46Provision the Prism Remote Unit46FlexWave Notch Filter (FWP-SPRINTFILTER)47Notch Filter Installation Tips47Notch Filter Specifications48Standards Certification49Accessing User Documentation on the TE Customer Portal50Contacting TE Connectivity51Size: 4.13 MBPages: 51Language: EnglishOpen manual
