User ManualTable of Contents1. Installation of Allied Telesyn 910051.1 Installation Overview for the 910051.1.1 Allied Telesyn 9100 Configuration51.2 Following Procedures for the 9101, 9102, and 910361.3 Selecting a Site for the 910061.3.1 9101 Site Requirements71.3.2 9102/9103 Site Requirements81.4 Setup Checklist101.4.1 9101 Parts Included in Order101.4.2 9102 / 9103 Parts Included in Order111.5 Shelf Mounting Options121.5.1 9101 Mounting Options121.5.2 9102/3 Mounting Options151.6 Wall Mounting Option181.6.1 Overview181.6.2 Installing the Wall Mount191.7 Allied Telesyn 9100 Installation Safety191.7.1 Safety Guidelines191.7.2 Safety Precautions While Working with Electricity201.7.3 Electrostatic Discharge201.7.4 Precautions and Conformance Standards211.7.5 Laser Safety Instructions221.8 Installing Power and Ground for the 9101221.8.1 Power and Grounding Cautions221.8.2 Connect Power and Ground231.8.3 Connect the -48VDC office power supply to the 9101 PEM plug.251.8.4 Connect to Power Source (Single or Dual)261.8.5 Apply and Check Power (DC Power Supply)261.9 Installing Power and Ground for the 9102271.9.1 Connect Power and Ground271.9.2 Apply and Check Power (AC Power Supply)271.10 Alarm Connections - 9101 (Optional)271.11 Install Card Modules281.11.1 Install the CFC12281.11.2 Install the Service Module291.11.3 Install the SFP Module291.11.4 Install Filler Plates (FPF)301.12 Configure Local Terminal or PC301.13 Connect System Cables321.13.1 Service Modules with RJ21connectors321.13.2 SMs with RJ45 connectors331.13.3 SMs with Optical connectors331.13.4 GE4/FE2331.13.5 Data Management Cable (MGMT Port on CFC12)341.14 Apply Power and Check Startup Sequence351.15 Check the configuration371.15.1 Check software load371.15.2 Check management interfaces371.16 Adding AC Power Module381.17 Allied Telesyn Contact Information382. Appendix392.1 Glossary of Terms392.2 Telesyn 9100 Inventory Form40Size: 2.34 MBPages: 40Language: EnglishOpen manual