Brother SL-1110A User Manuals

Table of Contents

• BAS-341F,342F

  1
• SAFETY INSTRUCTIONS

  2
  • 1 Safety indications and their meanings

    2
  • 2 Notes on safety

    3
  • 3 Warning labels

    5
• CONTENTS

  6
• 1. NAME OF EACH PARTS

  8
• 2. SPECIFICATIONS

  9
• 3. PREPARATION

  10
  • 3-1. Before setting up

    10
  • 3-2. Positioning

    11
  • 3-3. Tilting the sewing machine head

    11
  • 3-4. Connecting the ground wire

    12
  • 3-5. V-belt tension

    12
  • 3-6. Installing the foot switch

    12
  • 3-7. Installing the spool stand

    13
  • 3-8. Installing the programmer (option)

    13
  • 3-9. Adjusting the air pressure

    14
• 4. LUBRICATION

  15
  • 4-1. Lubrication points

    15
• 5. CORRECT USE

  16
  • 5-1. Selecting the needle and thread

    16
  • 5-2. Installing the needle and running the sewing machine

    16
  • 5-3. Threading the upper thread

    17
  • 5-4. Winding the lower thread

    18
  • 5-5. Replacing the bobbin case and threading the thread

    19
  • 5-6. Sewing conditions and thread tension

    19
    • 5-6-1. Sewing conditions

      19
    • 5-6-2. Lower thread tension

      20
    • 5-6-3. Upper thread tension

      20
    • 5-6-4. Thread take-up spring height

      20
    • 5-6-5. Thread take-up spring tension

      20
    • 5-6-6. Pretension tension

      21
• 6. USING THE OPERATION PANEL

  22
  • 6-1. Explanation of panel

    22
  • 6-2. Using the floppy disk

    24
  • 6-3. Using the program R/W (Read/Write) switch

    26
  • 6-4. Using the TEST switch (Checking the sewing pattern)

    27
  • 6-5. Using the emergency stop switch

    28
  • 6-6. Adjusting the sewing SPEED control

    29
  • 6-7. Changing the X-SCALE and Y-SCALE settings

    29
  • 6-8. Using the bobbin thread counter

    30
  • 6-9. Using production counter

    31
  • 6-10.Using single split mode

    32
  • 6-11. Shifting a stitch pattern

    33
• 7. SEWING

  34
  • 7-1. Before starting sewing....

    34
  • 7-2. Sewing operation

    34
• 8. MAINTENANCE AND INSPECTION

  36
  • 8-1. Cleaning the shuttle hook

    36
  • 8-2. Lubrication

    36
  • 8-3. Draining the oil

    37
  • 8-4. Cleaning the control box air inlet port

    37
  • 8-5. Cleaning the eye guard

    38
  • 8-6. Checking the needle

    38
• 9. STANDARD ADJUSTMENTS

  39
  • 9-1. Adjusting the needle bar height

    39
  • 9-2. Adjusting the needle bar lift amount

    39
  • 9-3. Adjusting the needle clearance

    40
  • 9-4. Adjusting the driver needle guard

    40
  • 9-5. Adjusting the shuttle race thread guide

    40
  • 9-6. Adjusting the movable knife

    41
  • 9-7. Presser foot adjustment

    43
  • 9-8. Changing the presser foot lift

    44
  • 9-9. Adjusting the wiper

    45
  • 9-10. Adjusting the needle up stop position

    45
  • 9-11. Checking the input sensor and DIP switch input

    46
  • 9-12. Checking the input voltage

    47
  • 9-13. Clearing all memory settings

    47
• 10. DIP SWITCH

  48
  • 10-1. Panel DIP switch functions

    48
  • 10-2. DIP switches inside the control box

    50
• 11. CHANGING SPECIAL FUNCTIONS AND USING THE MEMORY SWITCHES

  52
• 12. ERROR CODES

  57
• 13. GAUGE PARTS LIST ACCORDING TO SUBCLASSES

  59
• 14. NOTES ON THE PROCESSING AND PRODUCTION OF PLATE BLANKS

  60
• 15. TROUBLESHOOTING

  61
• 16. OPTION

  65
• COVER

  67