Chamberlain security hd200dm User Manuals

Table of Contents

• Owner's Manual

  1
• TABLE OF CONTENTS

  2
• INTRODUCTION

  2
  • Safety Symbol and Signal Word Review

    2
  • Preparing your garage door

    3
  • Tools needed

    3
  • Planning

    4
  • Carton Inventory

    6
  • Hardware Inventory

    7
• ASSEMBLY

  8
  • Assemble the Rail & Install the Trolley

    8
  • Fasten the Rail to the Motor Unit

    9
  • Install the Idler Pulley

    9
  • Install the Chain/Cable

    10
  • Tighten the Chain

    11
• INSTALLATION

  11
  • Determine the Header BracketLocation

    12
  • Install the Header Bracket

    13
  • Attach the Rail to the Header Bracket

    14
  • Position the Opener

    15
  • Hang the Opener

    16
  • Install the Door Control

    17
  • Install the Light

    18
  • Attach the Emergency Release Ropeand Handle

    18
  • Electrical Requirements

    19
  • Install The Protector System®

    20
    • IMPORTANT INFORMATION ABOUT THE SAFETYREVERSING SENSOR

      20
    • INSTALLING THE BRACKETS

      21
    • MOUNTING AND WIRING THE SAFETY REVERSING SENSORS

      22
    • ALIGNING THE SAFETY REVERSING SENSORS

      22
    • TROUBLESHOOTING THE SAFETY REVERSINGSENSORS

      22
  • Fasten the Door Bracket

    23
  • Connect Door Arm to Trolley

    25
• ADJUSTMENT

  27
  • Adjust the UP and DOWN Travel Limits

    27
  • Adjust the Force

    28
  • Test the Safety Reversal System

    29
  • Test The Protector System®

    29
• OPERATION

  30
  • Using Your Garage Door Opener

    30
  • Using the Wall-Mounted Door Control

    31
  • To Open the Door Manually

    31
• CARE OF YOUR OPENER

  32
• HAVING A PROBLEM?

  33
• Diagnostic Chart

  34
• PROGRAMMING

  35
  • To Add or Reprogram a Hand-held Remote Control

    35
  • To Add, Reprogram or Change a Keyless Entry PIN

    36
• REPAIR PARTS

  37
  • Rail Assembly Parts

    37
  • Installation Parts

    37
  • Motor Unit Assembly Parts

    38
• ACCESSORIES

  39
• WARRANTY

  40