User ManualTable of ContentsIntroduction91.1 Terminal specifications101.1.1 CEM emerald product codes101.1.2 Terminal dimensions111.1.3 Part ratings111.1.4 Onboard memory121.1.5 Terminal key component parts131.2 Simplified AC2000 Network Topology141.3 Hardware Installation Process15Mounting the Terminal172.1 Preparing for mounting172.1.1 Recommended tools172.1.2 Opening the terminal182.1.3 Mounting the terminal back casing19Wiring the Terminal213.1 Cabling requirements213.1.1 Ethernet host213.2 The Front Board223.3 The Input/Output Board233.4 Wiring locks243.4.1 Wiring a voltage provided lock (internal power)243.4.2 Wiring a voltage not provided lock (external power)253.4.3 Output power switch253.4.4 Inputs not in use253.5 Terminal with Request to Exit Switch263.6 Configuration information273.7 Terminal with 3rd Party Wiegand Read Head283.8 Configuration information293.9 Terminal with S610s Exit Reader303.9.1 Configuration information313.10 Terminal with DIU 210323.10.1 Configuration information333.11 Terminal with DIU 230343.11.1 Configuration information353.12 PoE+ Terminal with S610s Exit Reader363.12.1 Configuration373.13 Tamper Detection on Reader Inputs383.13.1 Wiring the resistor network383.13.2 Configuring software for tamper detection383.13.3 Re-assembling the terminal39Reader Network Configuration414.1 Checking emerald’s Network Status414.2 Accessing the Configuration Menu424.2.1 Setting the terminal IP address, gateway and subnet mask424.2.2 Network routing - (advanced users)434.2.3 Testing the connection with the AC2000 server43AC2000 Software Configuration455.1 Reader Addressing455.2 Adding the device to AC2000465.2.1 Configuring a 3rd party read head475.3 Configuring Device Inputs485.3.1 Adding an input alarm485.3.2 Configuring 4 state tamper inputs485.4 Editing emerald Entries in AC2000495.4.1 Editing device properties495.4.2 Editing a device input495.4.3 Deleting a device input495.4.4 Input alarms495.5 Assigning Remote Applications (TS300 model only)525.5.1 Creating groups525.5.2 Adding remote applications to groups525.5.3 Assigning a remote application group to users535.6 Next Steps53The System Configuration Menu556.1 Menu Overview556.2 Navigation566.3 Accessing the system configuration menu566.3.1 Device settings menu576.3.2 System Information menu606.3.3 Tests menu62Door Modes657.1 Door Mode657.1.1 Door mode timings657.1.2 Multi-swipe access667.2 Control Post Mode687.2.1 Software configuration for control post mode687.3 Passenger Mode697.3.1 Configuring passenger mode in the software697.3.2 The passenger mode cycle707.3.3 Lobby mode707.4 Interlock717.4.1 Wiring two terminals for interlock717.4.2 The interlock process in door mode737.4.3 The interlock process in passenger mode737.5 Image on Swipe757.5.1 Enabling Image on swipe757.5.2 Configuring Image on swipe options767.5.3 Random checks78Checking the firmware version of the terminal81Loading the firmware onto the terminal(s)81Updating the terminal82Appendix II: Device Settings Remote Application83Using the Application83Configuring the options84Appendix III: Broadcast and Timezone Priorities89Appendix IV: Loading Card Definitions91Appendix V: Configuring a Third Party Reader as a Master93Licensing the emerald logo change function95Enabling the emerald logo change function on the CDC96Uploading a user defined Card Logo in AC2000 WEB96Size: 4.07 MBPages: 100Language: EnglishOpen manual